Waterless Car Wash Tips

 

• Preferably find a shaded location so car panels can cool first before applying
• If your encounter streaking the soaps (surfactants) have dried too quickly, simply re-apply product and wipe dry to remove.
   
• Fold microfiber towel in fourths and rotate as sides become soiled
• Work your way from the top-down (roof, windows, hood, trunk, lower panels)
• Do lower body panels last, these tend to be the dirtiest
• Use on both wet or dry surfaces
• Make sure both the panel and towel are sprayed before use
• Avoid "rubbing" the waterless car wash into panels...use smooth motions

Dashboard + Trim

 

• Spray Eco Touch Dashboard + Trim onto microfiber towel first, then wipe onto surface You’ll avoid overspray on the windows this way
• For a smoother finish, follow-up initial wipe with a second dry microfiber
• Make sure your dashboard is cool first before wiping to avoid streaking
   
• Regular cleaning will help prevent fading and cracking from the effects of the sun
• For smaller vents pull out a small cotton swab and apply Eco Touch Dashboard + Trim
• For console knobs and hard to reach areas, consider using a specialty detailing brush

Carpet + Upholstery

 

• Vacuum your car’s interior frequently as most of the wear and tear of carpeting is caused by dirt.
• Treat stains immediately after they occur. The majority can be removed very easily if they are treated sooner rather than later.
• Test first in an inconspicuous area to ensure colorfastness.
• Never aggressively rub or brush spots as it can push dirt particles even deeper into carpet fabrics.
• Do not overwet carpets or upholstery as this can cause brownout, carpet shrinkage, or other problems. Less is best.

Metal Polish

 

• For heavily oxidized surfaces, let formula penetrate for at least 2 minutes.
• For optimal results, buff with a dry towel